DETAILED DESCRIPTION

Wall-mounted temperature, humidity and CO2 sensors

The SHSUXXXX series are bus-powered room sensors for wall-mounting.
They are available in different combinations:
- Temperature or
- Temperature + Humidity or
- CO2 + Temperature or
- CO2 + Temperature + Humidity
The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly

Wall-mounted temperature, humidity and CO2 sensors with LCD display

The SHSUXXXd series are bus-powered room sensors for wall-mounting.
They are available in different combinations:
- Temperature or
- Temperature + Humidity or
- CO2 + Temperature or
- CO2 + Temperature + Humidity
The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The sensors have a LCD display for showing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed.

Wall-mounted temperature, humidity and CO2 sensors with “traffic light”

The SHSUXXXl series are bus-powered room sensors for wall-mounting.
They are available in different combinations:
- CO2 + Temperature or
- CO2 + Temperature + Humidity
The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The sensors have a “traffic light” LED which is used to indicate the CO2 level in green, amber or red colour.

Weather station for smart house / building application

The SHOWEAGPS weather Station measures temperature, wind speed and brightness (eastern, southern and western sun) and recognizes precipitation. The direction of the sun (azimuth) as well as its height (elevation) are calculated and indicated, too. Recognition of twilight/dawn with special filters
Data are usually output after a request made by the Modbus master via a 2-wire RS485 connection.
Wind measurement: the wind strength measurement takes place electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures.
Even turbulent air and anabatic winds in the vicinity of the weather station are recorded
Heated precipitation sensor (1.2 watts): no false reports as a result of fog or dew. Dries quickly after precipitation has stopped.
Integrated GPS receiver. Position (degree of longitude and latitude) and position of the sun (azimuth, elevation).