DETAILED DESCRIPTION

PT100 (with DIN head 3-wires and EASY-UP)
Temperature measurement by resistance thermometers relies on a property common to all conductors and semiconductors, which is the variation in their electrical resistance in relation to temperature change. PT100 sensor has a resistance of 100 ohms at 0°C and the coefficient of variation is  0.00385 ohm per degree centigrade. The technology is based on thin platinum layers on a ceramic substrate (thin-film resistors).
The PT100 Easy-up probes are assigned a numeric code that once inserted allows the Pixsys controllers to automatically set the main operating parameters.

Specifications

• Stem diameter: 6mm
• Immersion material: Steel AISI 304 or 316
• Internal insulation: MgO Magnesium oxide > 20mOhm at 25°C (500Vdc)
• Sensor: PT100 class B (+/- 0,3°C up to 25°C)
• Response time: 6,5 seconds (BS 1904/1984/CEI60751)
• Head: DIN/B aluminium alloy, red epoxidic painting
• Sealing: IP66
• Operating temperature: -100 ... +500°C

Ordering codes

• 2000.90.530: Ø=6 mm, length:30 mm, connection 1/4 "GAS, wire output Pg16 
• 2000.90.515: Ø=6 mm, length:100 mm, no process connection, wire output Pg11 
• 2000.95.515: Ø=6 mm, length:100 mm, no process connection, Thermowell, wire output Pg11
• 2000.90.516: Ø=6 mm, length:200 mm, no process connection, wire output Pg11
• 2000.95.516: Ø=6 mm, length:200 mm, no process connection, Thermowell, wire output Pg11
• 2000.90.517: Ø=6 mm, length:300 mm, no process connection, wire output Pg11
• 2000.95.517: Ø=6 mm, length:300 mm, no process connection, Thermowell, wire output Pg11
• 2000.90.518: Ø=6 mm, length:400 mm, no process connection, wire output Pg11
• 2000.95.518: Ø=6 mm, length:400 mm, no process connection, Thermowell, wire output Pg11